 |
|---|
 |
 |
 |
 |
| Graco Spray gun |
|---|
| Part No: L0242 |
| Includes spray gun with one (1) quart paint container. Includes standard brass needle and fluid tip. Good to have a spare if painting a variety of jobs or different colors on same job. |
| Graco Paint container |
|---|
| Part No: HVACC3FD |
| One (1) quart capacity. Ideal spare if painting a variety of jobs. Allows storing pre-mixed paint in greater volumes. Allows storing different colored paints. Allows storing unused paint while spraying another job. |
| Ultra fine finish needle and tip (1.0mm/0.04") |
|---|
| Part No: HVACC10R |
| Ideal for an ultra fine finish and thin viscosity materials, especially water-based finishes. |
| Fine finish needle and tip (1.5mm/0.06") |
|---|
| Part No: HVACC15R |
| Ideal for a fine finish and thin/medium viscosity materials. |
| Viscosity Cup - Ford #4 |
|---|
| Part No: SG243 |
| The viscosity cup is used to indicate if a product is thin or thick. Materials should be tested before spraying to see if thinning is required. The correct viscosity is important to ensure the paint atomizes correctly and sprays evenly. |
| Graco spray gun |
|---|
| Part No: HVGA001 |
| Includes spray gun with one (1) quart paint container. Includes standard brass needle and fluid tip. Good to have a spare if painting a variety of jobs or different colors on same job. |
| Graco paint container |
|---|
| Part No: HVMAC7 |
| One (1) quart capacity. Ideal spare if painting a variety of jobs. Allows storing pre-mixed paint in greater volumes. Allows storing different colored paints. Allows storing unused paint while spraying another job |
| Graco spray pack |
|---|
| Part No: HVACCS2USG |
| For all those larger painting tasks - make your life easier with the one gallon Spray Pack, great for any large surface area such as fences, walls and ceilings. Comes with 4.6ft and 13ft clear tube, tube clips, shoulder straps, hose adjustor, DVD and manual. |
| Ultra fine finish needle and tip (1.0mm/0.04") |
|---|
| Part No: HVACV1 |
| Ideal for an ultra fine finish and thin viscosity materials, especially water-based finishes. |
| Fine finish needle and tip (1.5mm/0.06") |
|---|
| Part No: HVACV15 |
| Ideal for a fine finish and thin/medium viscosity materials. |
| Stain/Latex needle and tip (2.0mm/0.08") |
|---|
| Part No: HVACV2 |
| Ideal for a quality finish and medium/thick viscosity materials. |
| Course finish needle and tip (3.0mm/0.12") |
|---|
| Part No: HVACV3 |
| This needle is ideal for a course finish and thick viscosity. |
| Viscosity Cup - Ford #4 |
|---|
| Part No: SG243 |
| The viscosity cup is used to indicate if a product is thin or thick. Materials should be tested before spraying to see if thinning is required. The correct viscosity is important to ensure the paint atomizes correctly and sprays evenly. |
| Spray Gun Spares |
|---|
| Part No: HVA0022 |
| Spare kit for SprayStation HV2900 and HV3900. Includes (1) pick-up tube, (1) needle location tool, (1) filter, (2) Fluid tip o-ring, (2) gaskets. |